Description
«Trace» wooden texture is unmistakably effective in the furniture design as well as a wall decor, as we have seen by applying it in a set of bedroom furniture. Tandem "wall panel - furniture" allows to achieve the integrity of the interior and leaves a great choice for its personalization due to various color solutions.
The case is made of solid oak
Different tones are possible
Design: YourFoRest
Specification
Material: oak, ash
Coating: varnish / oil
Equipment: 1 chest of drawers and 2 bedside tables
Chest dimensions: depth 450mm, height 600mm, width 1450mm
Dimensions of thumbs: depth 365 mm, height 500 mm, width 400 mm
Individual sizes available on request
OPERATING REQUIREMENTS
- The room should have been prepared before installing joinery of solid wood. No repair works (plastering, screeding, strainer works, etc.) are allowable as the humidity level must be within 40-60%. Both excessive dryness and humidity are equally harmful for products from wood.
- Room temperature should be within 15 to 30 degrees. Otherwise, inhomogeneous drying of wooden parts will result in their deformation. During storage and use, the joinery should be protected from mechanical damage, moisture, corrosive materials, direct sunlight, fire, as well as sudden changes in temperature and humidity.
- Abrupt changes in temperature and humidity (no more than 5% per hour) are unallowable.
Description
«Trace» wooden texture is unmistakably effective in the furniture design as well as a wall decor, as we have seen by applying it in a set of bedroom furniture. Tandem "wall panel - furniture" allows to achieve the integrity of the interior and leaves a great choice for its personalization due to various color solutions.
The case is made of solid oak
Different tones are possible
Design: YourFoRest
Specification
Material: oak, ash
Coating: varnish / oil
Equipment: 1 chest of drawers and 2 bedside tables
Chest dimensions: depth 450mm, height 600mm, width 1450mm
Dimensions of thumbs: depth 365 mm, height 500 mm, width 400 mm
Individual sizes available on request
OPERATING REQUIREMENTS
- The room should have been prepared before installing joinery of solid wood. No repair works (plastering, screeding, strainer works, etc.) are allowable as the humidity level must be within 40-60%. Both excessive dryness and humidity are equally harmful for products from wood.
- Room temperature should be within 15 to 30 degrees. Otherwise, inhomogeneous drying of wooden parts will result in their deformation. During storage and use, the joinery should be protected from mechanical damage, moisture, corrosive materials, direct sunlight, fire, as well as sudden changes in temperature and humidity.
- Abrupt changes in temperature and humidity (no more than 5% per hour) are unallowable.
