Description
Bedside table is made using a textured Pixels mosaic for the front side of drawers. It can also be ordered in the bedroom furniture Pixels Bedside set (link to the set). FurniturePixels in combination with the wall panel MosaicPixels - is an original interior solution for the bedroom.
The case is made of solid oak.
Different tones are possible.
Design: YourFoRest
Specification
Material: ash, oak
Coating: varnish, oil
Dimensions of bedside table: depth 365 mm, height 500 mm, width 400 mm
Individual sizes available on request
OPERATING REQUIREMENTS
- The room should have been prepared before installing joinery of solid wood. No repair works (plastering, screeding, strainer works, etc.) are allowable as the humidity level must be within 40-60%. Both excessive dryness and humidity are equally harmful for products from wood.
- Room temperature should be within 15 to 30 degrees. Otherwise, inhomogeneous drying of wooden parts will result in their deformation. During storage and use, the joinery should be protected from mechanical damage, moisture, corrosive materials, direct sunlight, fire, as well as sudden changes in temperature and humidity.
- Abrupt changes in temperature and humidity (no more than 5% per hour) are unallowable.
Description
Bedside table is made using a textured Pixels mosaic for the front side of drawers. It can also be ordered in the bedroom furniture Pixels Bedside set (link to the set). FurniturePixels in combination with the wall panel MosaicPixels - is an original interior solution for the bedroom.
The case is made of solid oak.
Different tones are possible.
Design: YourFoRest
Specification
Material: ash, oak
Coating: varnish, oil
Dimensions of bedside table: depth 365 mm, height 500 mm, width 400 mm
Individual sizes available on request
OPERATING REQUIREMENTS
- The room should have been prepared before installing joinery of solid wood. No repair works (plastering, screeding, strainer works, etc.) are allowable as the humidity level must be within 40-60%. Both excessive dryness and humidity are equally harmful for products from wood.
- Room temperature should be within 15 to 30 degrees. Otherwise, inhomogeneous drying of wooden parts will result in their deformation. During storage and use, the joinery should be protected from mechanical damage, moisture, corrosive materials, direct sunlight, fire, as well as sudden changes in temperature and humidity.
- Abrupt changes in temperature and humidity (no more than 5% per hour) are unallowable.
