Description
Italy Classic panels combine the motifs of ceiling caissons, the decorative elements of Italian Renaissance temples and palaces, and the motifs of modern abstract art, namely the works of a painter and graphic artist Frank Stella. The Italy Classic code consists of three types of square elements, which make up the entire random canvas of the wall panel.
Design: Juanny Barcelò Borges
Material: walnut
Module size: 300 x 300 mm
Coating: varnish
The minimum order for this product is 3 sq.m.
OPERATING REQUIREMENTS
- The room should have been prepared before installing joinery of solid wood. No repair works (plastering, screeding, strainer works, etc.) are allowable as the humidity level must be within 40-60%. Both excessive dryness and humidity are equally harmful for products from wood.
- Room temperature should be within 15 to 30 degrees. Otherwise, inhomogeneous drying of wooden parts will result in their deformation. During storage and use of the joinery should be protected from mechanical damage, moisture, corrosive materials, direct sunlight, fire, as well as sudden changes in temperature and humidity.
- Abrupt changes in temperature and humidity (no more than 5% per hour) are unallowable.
Italy Classic
Description
Italy Classic panels combine the motifs of ceiling caissons, the decorative elements of Italian Renaissance temples and palaces, and the motifs of modern abstract art, namely the works of a painter and graphic artist Frank Stella. The Italy Classic code consists of three types of square elements, which make up the entire random canvas of the wall panel.
Design: Juanny Barcelò Borges
Material: walnut
Module size: 300 x 300 mm
Coating: varnish
The minimum order for this product is 3 sq.m.
OPERATING REQUIREMENTS
- The room should have been prepared before installing joinery of solid wood. No repair works (plastering, screeding, strainer works, etc.) are allowable as the humidity level must be within 40-60%. Both excessive dryness and humidity are equally harmful for products from wood.
- Room temperature should be within 15 to 30 degrees. Otherwise, inhomogeneous drying of wooden parts will result in their deformation. During storage and use of the joinery should be protected from mechanical damage, moisture, corrosive materials, direct sunlight, fire, as well as sudden changes in temperature and humidity.
- Abrupt changes in temperature and humidity (no more than 5% per hour) are unallowable.