Description
Batten method is one of the most popular ways to fill the space with eco-materials. Laconic Batten Plank panels are versatile for any interior, that is the reason why designers and architects like to use them in their own projects.
SPECIFICATION
Material: Oak, ash, maple, alder
Sizes of cuts: 20x20, 30x20, 35x20, 40x20, 50x20 mm
The maximum length of the slat: 2800 mm
Coating: oil, varnish
The minimum order for this product is 50 running meters.
Example of cut:
OPERATING REQUIREMENTS
- The room should have been prepared before installing carpentry of solid wood. No repair works (plastering, screeding, strainer works, etc.) are allowable as the humidity level must be within 40-60%. Both excessive dryness and humidity are equally harmful for products from wood.
- Room temperature should be within 15 to 30 degrees. Otherwise, inhomogeneous drying of wooden parts will result in their deformation. During storage use the carpentry should be protected from mechanical damage, moisture, corrosive materials, direct sunlight, fire, as well as sudden changes in temperature and humidity.
- Abrupt changes in temperature and humidity (no more than 5% per hour) are not permissible.
Description
Batten method is one of the most popular ways to fill the space with eco-materials. Laconic Batten Plank panels are versatile for any interior, that is the reason why designers and architects like to use them in their own projects.
SPECIFICATION
Material: Oak, ash, maple, alder
Sizes of cuts: 20x20, 30x20, 35x20, 40x20, 50x20 mm
The maximum length of the slat: 2800 mm
Coating: oil, varnish
The minimum order for this product is 50 running meters.
Example of cut:
OPERATING REQUIREMENTS
- The room should have been prepared before installing carpentry of solid wood. No repair works (plastering, screeding, strainer works, etc.) are allowable as the humidity level must be within 40-60%. Both excessive dryness and humidity are equally harmful for products from wood.
- Room temperature should be within 15 to 30 degrees. Otherwise, inhomogeneous drying of wooden parts will result in their deformation. During storage use the carpentry should be protected from mechanical damage, moisture, corrosive materials, direct sunlight, fire, as well as sudden changes in temperature and humidity.
- Abrupt changes in temperature and humidity (no more than 5% per hour) are not permissible.